Rain Coat ®
Clear Water Repellant
Oil Base

Protect new or weathered wood from water damage, including splitting and warping.
Proprietary, 3-part water repellent.
Mildew resistant coating.
Designed for IMMEDIATE application to new P-T wood.
100% clear – no pigment added.
   - Reveals original wood look.
   - Allows wood to gray naturally.
One-coat coverage.

Recommended Uses:

Wood Types:
Pressure-treated lumber
Pine, cypress, fir, hemfir
Cedar and redwood

Decks, porches, docks
Gazebos, arbors, trellises
Outdoor furniture, play sets, and more!

Resin Type:




2 formulas: Max 590 g/l; Max 250 g/l



1-Gallon, 5-Gallon

Recommended Uses:
   Wood Type:


P-T Lumber, Pine, Cypress, Fir, Hemfir, Cedar, Redwood, Domestic Hardwoods.

   Wood Condition:


Uncoated, New or Weathered Wood: Before coating, prepare surface with a Wolman wood cleaner.

Previously Coated Wood:
Remove pigmented finish before applying this product.



Stir before and occasionally during application. Do not tint or dilute.
Cover surrounding surfaces and plant life not intended to be coated.

Application Method:



Pump sprayer, natural or synthetic bristle brush or roller

Airless sprayer – .009–.015 inch tip; 250-500 psi

No. of Coats:


One (1) coat. Do not over–apply.

Dry Time:


Touch: 1 hour;  Walk On: 12 hours;  Use: 24 hours.

Best Practice Tips:


Apply when temperature is 40-90 F, and no precipitation is expected for 24 hours. Work end to end on a few boards at a time; maintain a wet edge. Back-brush after spraying.

Approx. Coverage/Gal:


Rough surface: 150-200 sq. ft.   Smooth surface: 300-350 sq. ft.

Clean Up:


Mineral spirits.



Closed, original labeled container, away from heat and flame.



Highly effective water repellent and mildew suppressant in a penetrating oil finish. Reveals original wood color and grain – no pigment added. Ideal for brand new pressure-treated lumber.

Close Window

© EXTERIOR WOOD, Inc. all rights reserved.